Mediabridge MWN-WAPR150N User Guide - Manual (Page 28)

MWN-WAPR150N Wireless Router v11.8
28
2.2 How to Install the Router – For DSL
Modem Users
(and other users who require changing the default IP Address
of the Medialink Router)
Some DSL Modems require the PPPoE connection to be
handled by the router instead of the modem to be able to
successfully create a network using some routers. If you
typically have to enter a Username and Password into your
computer to access the internet or if your previous router
had your DSL Username and Password stored in it, please
skip to section 2.2a ADSL Virtual Dial-Up via PPPoE. If you
are unsure, continue below.
Please follow these instructions BEFORE using your new
Medialink router with your DSL Modem.
1. Connect A Computer To The Medialink Router –
Using a network cable, plug one end into the
computer’s network port. Plug the other end into
one of your router’s yellow ports.
2. Power On The Medialink Router - Connect the
included AC/DC adapter to the router’s power port.