Mediabridge MWN-WAPR150N User Guide - Manual (Page 88)

MWN-WAPR150N Wireless Router v11.8
88
Chapter 7 DHCP Server
7.1 DHCP Settings
DHCP (Dynamic Host Control Protocol) assigns an IP
address to the computers on the LAN/private network. When
you enable the DHCP Server, the DHCP Server will allocate
automatically an unused IP address from the IP address pool
to the requesting computer in premise of activating “Obtain
an IP Address Automatically”. Specify the starting and ending
address of the IP Address pool to establish the range of your
IP addresses. “100” to “200” is set by default.
 DHCP Server: Click the checkbox to enable/disable
DHCP server.
 IP Address Start/End: Enter the range of IP address
for DHCP server distribution.
 Lease Time: The length of the IP address lease.
For example ：
If the lease time is an hour, then DHCP server will reclaim the
IP address every hour.