Mediabridge MWN-WAPR150N User Guide - Manual (Page 48)

MWN-WAPR150N Wireless Router v11.8
48
42). When creating the SSID, use a different name from the
one used in your first attempt. Once setup is complete, you
may then unplug the computer and connect wirelessly.
(For more details in choosing your security Type see the
“Help_WirelessNetworkSecurity.pdf”or
“Help_WEP_WPA_WPA2.pdf” document located in
the User Guide folder on the CD.)
12.
Congratulations!
You have successfully
setup your Medialink Router! For help with
connecting your wireless devices, see section “2.4
Connecting Your Wireless Devices” on Page 52.
2.3 Router to Router Configuration
1. Connect your computer directly to the Residential
Gateway, Wireless Modem or Original Router (will be
referred to as “Original Router” in the remaining steps
below) via an Ethernet cable.
2. Find the Default Gateway of the Original Router. It
is typically 192.168.0.1 or 192.168.1.1. Here’s how to
find the Default Gateway:
a. XP Users: Click on Start > Control Panel >