Mediabridge MWN-WAPR150N User Guide - Manual (Page 68)

MWN-WAPR150N Wireless Router v11.8
68
 MAC Address: The Router’s physical MAC address as
seen on your local network, which is unchangeable.
 IP Address: The Router’s LAN IP addresses (not your
PC’s IP address). 192.168.0.1 is the default value.
 Subnet Mask: The Router’s subnet mask is the
measurement of the network size. 255.255.255.0 is the
default value.
 IMPORTANT: Once you modify the IP address, you
need to remember it for the next time you login to the
Web-based Utility.
 CANNOT ACCESS ROUTER AFTER IP ADDRESS IS
CHANGED: You will need to renew the connection from
the router to the computer by doing the following:
XP Users: Start > Run > Type “cmd” > Enter > Type
“ipconfig/release” > Enter > Type “ipconfig/renew” >
Enter > Try again to access the router’s settings page
through the new IP address in a web browser.
Vista/7 Users: Start > Type “cmd” into the search
bar > Enter > Type “ipconfig/release” > Enter > Type
“ipconfig/renew” > Enter > Try again to access the
router’s settings page through the new IP address in a
web browser.