Triton RL5000 Installation Manual - Manual (Page 19)

1 9
5. Stand the unit up and walk it out of
the shipping carton.
6. Remove the wrapping from the
ATM.
7. Use the silver key to unlock both
the control panel and the fascia
door (which conceals the locking
mechanism) on the front of the
cabinet. Open the fascia door.
8. Turn the handle on the locking
mechanism to open the front
enclosure door. If the door is locked
see the sidebar on this page for
help in unlocking the electronic
lock.
9. Remove the accessory kit from
inside the bottom enclosure; open
and inspect the contents. Check
the contents against the enclosed
packing list. Report any missing
parts to Triton immediately.
POWER OUTLET
ACCESSIBILITY
Whether you are installing a new
outlet or plan to use an existing out-
let to supply power to the ATM,
make sure the following require-
ments are met:
1. The outlet is located near the
cabinet.
2. The outlet is easily accessible.
3. Access to the outlet will not be
blocked once the cabinet is in-
stalled!
C
ABINET
I
NSTALLATION
- S
TANDARD
A
NCHORS
UNLOCKING
ELECTRONIC
LOCKS
ELECTRONIC LOCK . Upon
arrival, the combination of the
lock should already be preset to
1-2-3-4-5-6. To unlock, enter the
preset combination and check
for proper operation. After each
keypress, the lock will beep.
After the final digit has been
entered, the lock will beep twice
and the open period will begin.
When a valid combination has
been entered, the operator will
have approximately 3 seconds
to open the lock. To open the
lock, turn the dial clockwise.
After the lock is opened, the
door latch may be turned and
the safe opened.