AW Gear Meters MX 9000 - Manual (Page 40)

MX 9000 Process Monitor
Operation and Programming Manual
39
MX 9000 User Manual, Rev. 2.0 7/16/2013
limit assigned to the previous function and the S1 or S2 display will read XXXX to indicate that it has no
function in this mode.
The LCD backlight will change to blue when the total reaches the S1 set point and turn red when it
reaches the S2 set point. Backlight colors can be changed if desired. See system settings programming
on page 34.
To disable the batch total S1 and S2 limits you must reprogram the limits. See page 27.
Notice