Avaya 15-601040 - Manual (Page 159)

1400 Series Phone User Guide Page 159
15-601040 Issue 06d (Monday, March 19, 2012) IP Office
System Administration: Setting the Time Offset
21.6 System Shutdown
You can shutdown the telephone system for a specified number of minutes. Note that this is not a polite shut-down, once
you have confirmed the action, any existing calls and services using the telephone system will start being disconnected.
The telephone system will then remain unavailable for the duration you specify, the default being 10 minutes. After the
shutdown duration it will take up to 5 more minutes for the telephone system to complete its restart.
1. Press the Features soft key if shown.
· To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2. Use the up and down arrow keys to scroll the display to the option Phone User.
3. Press the Select soft key or the OK button or the right arrow key.
4. Use the up and down arrow keys to scroll the display to the option System Admin. If the option is not
present then you may not have been configured as a system phone user by your system administrator.
5. Press the Select soft key.
6. Enter your security code (this is the same as your login code) and press the Done soft key.
7. Use the up and down arrow keys to scroll the display to the option System Shutdown.
8. Press the Select soft key or the OK button or the right arrow key.
9. The current default timeout (10 minutes) setting is shown and can be used by pressing Done soft key. Otherwise
enter the timeout required in hours and minutes and then press the Done soft key.
· The allowable range for the timeout is from 00:05 to 24:00. Note that the Done soft key is not displayed if
the timeout entered is not within the allowed range.
· To enter the : symbol in the timeout press either the * or # key.
· To delete the previous digit or character entered press the left arrow key.
10.After pressing the Done soft key, you will be asked to confirm whether you want to shutdown the telephone
system. Only proceed is you are sure. If you are not sure press the Back soft key.
11.If you press the Confirm soft key, the telephone system will switch itself to a shutdown state. This will
disconnect all current calls and services.