P.104 – Canon imagePROGRAF iPF9400S User Manual
Page 104
10
Select the
B
Borderless Printing check box to display
the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
In
C
Borderless Printing Method, click
D
Fit Paper Size.
14
Click Match Page Size in the
G
Paper Size list.
15
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "Confirming Print Settings."
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
Important
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
•
Document: Any type
•
Page size: 10×12 inches (254.0×304.8 mm)
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
iPF9400S
Enhanced Printing Options
Borderless Printing
104