Canon imagePROGRAF iPF9400S - Manual (Page 938)

Other Messages Other Messages
GARO Wxxxx (x represents a number) .............................................................................................................. 938
ERROR Exxx-xxxx (x represents a letter or number) ......................................................................................... 938
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ..................................................................... 938
Top cover is open. ............................................................................................................................................. 938
Prepare for parts replacement. .......................................................................................................................... 939
Parts replacement time has passed. ................................................................................................................. 939
Unknown file. ...................................................................................................................................................... 939
Calibration There is a problem with the multi-sensor. ........................................................................................ 939
Multi-sensor error ............................................................................................................................................... 939
GARO Wxxxx (x represents a number) GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number) ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon dealer for
assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper was
not advanced because the trailing edge is taped to the roll. Turn off the printer and remove the roll from the printer before re-
storing power.
Fastening tape or the Belt Stopper has not been removed inside the Top
Cover. Turn off the printer, open the Top Cover and remove the tape or the
Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before restoring
the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for as-
sistance.
Top cover is open. Top cover is open.
Cause Corrective Action
The printer has detected that the Top Cover is open. Open the Top Cover fully, remove any foreign objects, and close the Top Cover again.
If the error occurs again, turn off the printer and wait a while before restoring power.
GARO Wxxxx (x represents a number) iPF9400S
User's Guide
Error Message
Other Messages
938