Initializing the network settings – Canon imagePROGRAF iPF9400S User Manual
Page 736
Note
•
Communication can also be configured on the Network page in RemoteUI.
Email Notification When Printing is Finished or Errors Occur
Email Notification When Printing is Finished or Errors Occur
The printer can notify you of the printer status by email. Even when you are away from the printer, you can know when
printing is finished or if errors occur. Receive notification via email on your mobile phone or at your computer.
Use the imagePROGRAF Status Monitor (Windows) function to set up email recipients and message timing. Besides
being informed of finished print jobs or errors, you can also complete settings for email notification when service is nee-
ded or it's time to replace consumables. For detailed instructions,see "Specifying Printer-Related Information."
Note
•
For details on email notification using imagePROGRAF Status Monitor (in Windows), refer to the imagePROGRAF Status
Monitor help.
•
Mail server authentication is only supported with imagePROGRAF Status Monitor.
Initializing the Network Settings
Initializing the Network Settings
Use RemoteUI to restore the network settings to the default values as follows.
Important
•
Initializing the network settings will also restore the default value of the printer's IP address. As a result, the RemoteUI page
cannot be displayed in the web browser after this procedure.
•
For instructions on reconfiguring the IP address, see "Configuring the IP Address on the Printer."
•
For details on RemoteUI, see "Using RemoteUI."
1
Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
3
If a password has been set on the printer, enter the password.
4
Click Network in the Device Manager menu at left to display the Network page.
5
Click Reset to Default settings in the lower-right corner of the Network Interface group.
6
After confirming the message, click OK to restore the network settings to the default values.
Email Notification When Printing is Finished or Errors Occur
iPF9400S
Network Setting
Other Settings
736