Canon imagePROGRAF iPF9400S User Manual
Page 647
Important
•
If you set the Head Height lower than the automatically set height in parentheses ( ), check that the printhead does
not rub against the paper. (If the printhead rubs against the paper, there will be scratches in the printing results.) If
the printhead rubs against the paper, this can cause damage to the printhead.
•
If you change the Vacuum Strength, check that the printhead is not rubbing against the paper. (If the printhead
rubs against the paper, there will be scratches in the printing results.) If the printhead rubs against the paper, this
can cause damage to the printhead.
•
For details on the Head Height and Vacuum Strength, refer to the help.
14
The Step 6: Confirm the settings dialog box is dis-
played.
Configure the settings of the custom paper, and then
click the Next button.
15
The Confirm Update dialog box is displayed.
Confirm the updates and then click the Execute button.
The custom paper is added to the control panel of the
printer and to the printer driver of the PC you are using.
Important
•
If you have added custom paper with the POP Board / Cardboard category as the Standard Paper, remove the
loaded custom paper from the printer.
Note
•
When the custom paper is correctly added to the printer driver, the name of the added custom paper is displayed in
the Edit Media Types dialog box that is opened by Add Genuine Paper in the Media Configuration Tool window.
iPF9400S
Add Custom Paper (Mac OS X)
Handling and Use of Paper
Media Configuration Tool (Mac OS X)
647