Legal notices – Canon imagePROGRAF iPF9400S User Manual
Page 948
Caution
•
Never place anything on the printer such as small metal objects (paper clips, staples), liquids, any type of liquid container that
contains flammable liquids (alcohol, benzene, etc.). If such objects fall into the printer, this could cause a fire or electrical
shock.
•
Never insert your hand into the printer while it is printing. Moving parts inside the printer can cause injuries.
•
To prevent a fire hazard or dangerous electric shock, if a foreign object falls into or a liquid spills into the printer, press the
Power button immediately to switch the printer off, unplug the printer power cable from the outlet, and then call for service. If
you continue to use the printer, this could cause a fire or electrical shock.
Important
•
Connect the interface cable correctly. To avoid damage, before connection make sure that the shape of the cable connector
matches the connection point on the printer.
•
During printing, turn on the ventilation system in the room.
•
We recommend ensuring ample space for installation.
Legal Notices
Legal Notices
FCC Regulations (U.S.A)
Canon Large Format Printer
iPF9400S
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This de-
vice may not cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that in-
terference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. 516-328-5600
For CA, USA Only
Included battery contains Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for detail.
Trademarks
•
Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON INC.
•
Microsoft and Windows are trademarks of Microsoft Corporation, registered in the U.S. and other countries.
•
Macintosh is trademark of Apple Inc., registered in the U.S. and other countries.
Legal Notices
iPF9400S
Appendix
Safety Precautions
948