Canon imagePROGRAF iPF9400S - Manual (Page 844)

Important
• After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink Tank
Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
• To close the Ink Tank Cover when no Ink Tank is installed
(as when moving the printer), push the release lever (a)
as shown while returning the Ink Tank Lock Lever to the
original position.
Checking Ink Tank Levels Checking Ink Tank Levels
On the Display Screen, you can check how much ink is left in the ink tanks.
To check remaining Ink Tank levels, access the Tab Selection screen on the Control Panel and press
◀ or ▶ to se-
lect the Ink tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
• If an error has occurred and the Tab Selection screen cannot be displayed, display Ink Info as follows.
1. Press the OK button to display Printer Info.
2. Press the ▲ or ▼ button to select Ink Info.
3. Press the OK button.
The remaining ink levels shown on the Display Screen correspond to the inks identified by the Color Label on the bot-
tom of the Display Screen.
These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if you have deactivated ink
level detection.
The remaining ink level is indicated as shown below.
Checking Ink Tank Levels iPF9400S
User's Guide
Maintenance and Consumables
Ink Tanks
844