Canon imagePROGRAF iPF9400S - Manual (Page 608)

4
The media type names of the Canon genuine paper and feed confirmed paper within the selected category are
shown in Media Type Name. Select the media type to use as the basis of the custom paper, and click the Next
button.
Note
• If you do not know which media type to use as the basis of the custom paper, click the Assist button to open the
Media Type Selection Assistance dialog box, and then set either the Weight (grammage) or the Thickness. The
Media Configuration Tool automatically selects the appropriate paper from the selected paper category. Alternatively,
select the media type called General from among the displayed Media Type Name.
• Depending on the selected category, there might not be a media type called General.
• Depending on the selected category, the Assist button may be disabled.
5
The Step 2: Set the custom paper name dialog box is
displayed.
Enter an arbitrary name to display in the printer control
panel and printer driver, and then click the Next button.
Note
• The characters that can be entered for Name in Printer Driver and Name on Control Panel are stated below.
alphanumeric, space, "-", ".", "_", "()", "+", "%", ",", "/"
• For Name in Printer Driver up to 32 one Byte characters can be entered, and for Name on Control Panel up to 16
one Byte characters can be entered.
• Paper Name (English) is used in keeping track of the amount of roll paper left, in status print, etc.
6
Load the custom paper in the printer and then click the
OK button.
Add Custom Paper (Windows) iPF9400S
User's Guide
Handling and Use of Paper
Media Configuration Tool (Windows)
608