Canon imagePROGRAF iPF9400S - Manual (Page 755)

Setting Standard Prices
1
Select the media type in Media Type.
2
Enter the Width and Length of the paper, as well as the Price for the area of the configured width x height.
3
Click the Add button. To change the unit cost of a media type that has already been configured, click the Over-
write button.
4
Click the OK button.
Important
• The settings are not applied until you click the OK button.
Specifying Price by Roll Paper
1
Select the media type in Media Type.
2
Click the Roll Paper Width Settings button to display
the Roll Paper Width Settings dialog box.
3
Enter the Roll Paper Width and Length of the paper, as well as the Price for the configured length.
4
Click the Add button to return to the Paper sheet.
5
To change the unit cost of a media type that has already been configured, click the Overwrite button.
6
Click the OK button.
Important
• If you do not set the standard prices, you cannot set the price for each roll paper.
• If the Roll Paper Width is set to the same value as the Width of the paper configured in the standard prices, the cost is
calculated using the price configured in the Roll Paper Width Settings dialog box.
• The settings are not applied until you click the OK button.
iPF9400S Setting the Unit Cost for Paper
User's Guide
Print Job Management
Accounting (Windows)
755