Canon imagePROGRAF iPF9400S - Manual (Page 572)

(See "Using the Output Stacker.") →P.572
Using the Output Stacker Using the Output Stacker
The Output Stacker can be held at four positions, as shown.
• When storing printed documents on the Output Stacker
Use position (1).
• When the Output Stacker is not used
Use position (2).
• When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
Lower it to position (3) for storage. (See "Storing the Output Stacker.")
→P.576
When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stacker to
the tips of the left and right basket arms and pull it out completely .
• When printing on large, stiff sheets
Use position (3).
Set it to position (4) when printing banners or when printing on delicate paper. (See "Using the output stacker for
ejection in front.")
→P.573
Using the Output Stacker iPF9400S
User's Guide
Handling and Use of Paper
Output Stacker
572