Agilent Technologies AGILENT U2761A - Manual (Page 26)

8 U2761A User’s Guide
1 Getting Started
Inspection and Maintenance
Initial Inspection
When you receive your U2761A, inspect the unit for any
obvious damage such as broken terminals or cracks, dents,
and scratches on the casing that may occur during shipment.
If any damage is found, notify the nearest Agilent Sales
Office immediately. The front of this manual contains the
warranty information.
Keep the original packaging in case the U2761A has to be
returned to Agilent in the future. If you return the U2761A
for service, attach a tag identifying the owner and model
number. Also include a brief description of the problem.
Electrical Check
The U2761A USB Modular Function/Arbitrary Waveform
Generator Service Guide will provide the complete
verification and calibration procedures. The procedures will
verify to a high level of confidence that the U2761A is
operating in accordance with its specifications.
General Maintenance
1 Power off your module and remove the power cord and
I/O cable from your device.
2 Remove your module from the bumper casing.
3 Shake off any dirt that may have accumulated on the
module.
4 Wipe your module with a dry cloth and install the
bumper back in place.
N O T E
Any repair that is not covered in your modular product manuals should
only be performed by qualified personnel.