Agilent Technologies AGILENT U2761A - Manual (Page 52)

34 U2761A User’s Guide
2 Features and Functions
Soft Front Panel Operation
On the Offset panel as shown in Figure 2- 5 , input the
desired offset value and select the unit from the drop down
list.
Figure 2-5 Panel view of the DC offset section
Remote Interface Operation
VOLTage:OFFSet <offset>
Or, you can set the offset by specifying a high level and low
level using the following commands.
VOLTage:HIGH <voltage>
VOLTage:LOW <voltage>
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.