Agilent Technologies AGILENT U2761A - Manual (Page 42)

24 U2761A User’s Guide
1 Getting Started
Chassis Installation
The L -mount kit is to be installed to your U2761A module.
The following instructions describe the simple procedure of
installing the L
-mount kit and your module in the U2781A
chassis.
1 Unpack the L-mount kit from its packaging.
2 Remove your U2761A module from the bumper casing.
3 Using a Phillips screwdriver, fasten the L-Mount kit to
your U2761A module.
4 Insert your U2761A module into the U2781A chassis with
the 55 -pin backplane connector positioned at the bottom
of the module.
5 Once you have slotted the module into the chassis, tighten
the screws of the L -mount kit to secure the connection.