Agilent Technologies AGILENT U2761A - Manual (Page 31)

Getting Started 1
U2761A User’s Guide 13
6 Click Install to begin the installation. Follow the
instructions on the screen to proceed with the
installation.
7 Click Finish when the installation has completed.
D. Install the Agilent Measurement Manager
1 If you have done “C. Install the Module Driver” on
page 12, proceed to Step 2. If not, close all other
applications on your PC and insert the Product Reference
CD
-ROM into your CD-ROM drive.
2 Click Measurement Manager on the U2761A Installation Menu to
begin the installation.
3 If the installation menu does not appear after a few
seconds, go to Start > Run and type <drive>:\
Application\Modular Instruments Measurement
Manager\setup.exe where <drive> is your CD -ROM
drive location.
4 Click OK to begin the installation.
5 If you do not have any of the prerequisites installed, the
InstallShield Wizard software prerequisite will appear.