Agilent Technologies AGILENT U2761A - Manual (Page 86)

68 U2761A User’s Guide
2 Features and Functions
Remote Interface Operation
FUNCtion {SINusoid|SQUare|RAMP|USER}
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
FSK Carrier Frequency
The maximum carrier frequency depends on the function
selected as shown below. The default carrier frequency is
1 kHz for all functions.
Soft Front Panel Operation
On the Frequency panel as shown in Figure 2- 3 , input the
desired frequency value and select the unit from the drop
down list.
Remote Interface Operation
FREQuency <frequency>
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
Table 2-6 Carrier frequency for FSK
Function Minimum frequency Maximum frequency
Sine 1
μHz
20 MHz
Square 1
μHz
20 MHz
Ramp, Triangle 1
μHz
200 kHz
Arbitrary 1
μHz
200 kHz