Agilent Technologies AGILENT U2761A - Manual (Page 62)

44 U2761A User’s Guide
2 Features and Functions
Example 4, To output a Ramp wave
-> *CLS ; *RST //To reset the U2761A to default
power -on state, this command
can be ignored if this operation
is not required.
-> FUNC RAMP //Sets the output to Ramp wave.
-> VOLT 5 VPP //Sets the output amplitude to
5 Vpp.
-> FREQ 10000 //Sets the output frequency to
10 kHz.
-> VOLT:OFFS 0 //Sets the output offset to 0.
-> FUNC:RAMP:SYMM 50 //Changes the symmetry to 50%.
-> OUTP ON //Turns on output.