HP LaserJet 5200 Printer series - Manual (Page 104)

Printing multiple pages on one sheet of paper
You can print more than one page on a single sheet of paper. This feature provides a cost-effective
way to print draft pages.
1. Open the printer driver (see Gaining access to printer driver settings ).
2. Click the Layout pop-up menu.
3. Next to Pages per Sheet, select the number of pages that you want to print on each sheet (1,
2, 4, 6, 9, or 16).
4. Next to Layout Direction, select the order and placement of the pages on the sheet.
5. Next to Borders, select the type of border to print around each page on the sheet.
Printing on both sides of the paper
When duplex printing is available, you can automatically print on both sides of a page. Otherwise,
you can manually print on both sides of a page by feeding the paper through the printer a second
time.
CAUTION To avoid jams, do not load paper that is heavier than 105 g/m 2 (28-lb bond).
To use automatic duplex printing
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading
special paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer
first.
● For all other trays, load the letterhead paper face-down with the top edge at the back of the
tray.
2. Open the printer driver (see Gaining access to printer driver settings ).
3. Open the Layout pop-up menu.
90 Chapter 4 Printing tasks ENWW