HP LaserJet 5200 Printer series - Manual (Page 222)

Checking DIMM or CompactFlash installation
After installing the DIMM or CompactFlash card, make sure that the installation was successful.
To verify that DIMMs or CompactFlash cards are installed correctly
1. Turn the printer on. Check that the Ready light is illuminated after the printer has gone through
the startup sequence. If an error message appears, a DIMM or CompactFlash card might have
been incorrectly installed. See
Control-panel messages .
2. Print a configuration page (see Using printer information pages ).
3. Check the memory section on the configuration page and compare it to the configuration page
that was printed before the memory installation. If the amount of memory has not increased, the
DIMM or CompactFlash card might not be installed correctly, or the DIMM or CompactFlash
card might be defective. Repeat the installation procedure. If necessary, install a different DIMM
of CompactFlash card.
NOTE If you installed a printer language (personality), check the "Installed Personalities and
Options" section on the configuration page. This area should list the new printer language.
208 Appendix E Working with memory and print server cards ENWW