HP LaserJet 5200 Printer series - Manual (Page 96)

Printing on both sides (duplexing)
You can print on both sides of a sheet of paper (called duplexing or two-sided printing) in two ways—
automatic and manual. The following paper sizes are supported for automatic duplexing: letter, A4,
legal, and 8.5 x 13 in. Manual duplexing supports all paper sizes.
● Automatic duplexing: The built-in, automatic duplexer is included only with the HP LaserJet
5200dtn printer. It is available as an accessory for the other models.
● Manual duplexing: All printer models are capable of manual duplex printing. The printer prints
the first side of each page, waits for you to reinsert the paper into the printer, and then prints the
second side of each page. Other documents cannot be printed while the printer waits for you to
insert the paper for the second side to be printed.
Even if the printer includes a built-in duplexer, manual duplexing is necessary for the following
situations:
● When duplexing paper other than the supported sizes or weights—for example, paper heavier
than 105 g/m
2 (28 lb) or very thin paper.
● When you select Straight Paper Path in the printer driver
CAUTION Do not print on both sides of labels, transparencies, or vellum. Damage to the
printer and jams might result.
Paper orientation for printing on both sides
For manual duplexing, print on the second side of the sheet of paper first. The paper needs to be
oriented as shown in the following illustration.
● For tray 1, load the first side facing down with the bottom, short edge toward the printer.
● For all other trays, load the first side facing up with the top, short edge toward the printer.
1
2
1 Tray 1
2 All other trays
82 Chapter 4 Printing tasks ENWW