HP LaserJet 5200 Printer series User Manual
Page 78
Advertising
3.
Slide the media-width guides slightly wider than the media.
4.
Place media into the tray (short-edge in, print-side up). The media should be centered between
the media-width guides and under the tabs on the media-width guides.
5.
Slide the media-width guides inward until they lightly touch the media stack on both sides
without bending it. Make sure that the media fits under the tabs on the media-width guides.
NOTE
Do not add media to tray 1 while the printer is printing. This could cause a jam. Do
not close the front door when the printer is printing.
64
Chapter 4 Printing tasks
ENWW
Advertising