HP LaserJet 5200 Printer series - Manual (Page 81)

4. Place the paper in the tray and make sure that it is flat at all four corners. Keep the paper below
the height tabs on the paper-length guide in the rear of the tray.
Lock
5. Set the paper-size switch (callout 1) and paper-size dial (callout 2) to the size of the paper that
you loaded.
Lock
Custom
2 1
6. Slide the tray into the printer.
Loading optional tray 3 (500-sheet tray)
Tray 3 supports only paper. For supported paper sizes, see Paper specifications .
NOTE The tray 3 500-sheet tray is standard with the HP LaserJet 5200tn and HP LaserJet
5200dtn printer models.
ENWW Configuring trays 67