HP LaserJet 5200 Printer series - Manual (Page 75)

Configuring output bins
The printer has two output bins into which it places finished print jobs:
● Top (face-down) output bin: This it the default output bin at the top of the printer. Print jobs exit
the printer face-down into this bin.
● Rear (face-up) output bin: Print jobs exit the printer face-up into this bin at the rear of the printer.
NOTE You cannot use automatic duplex printing when printing to the rear output bin.
Printing to the top output bin
1. Make sure that the rear output bin is closed. If the rear output bin is open, the printer will deliver
the print job to that bin.
2. If you are printing on long media, open the top output bin support.
3. From your computer, send the print job to the printer.
ENWW Configuring output bins 61