HP Onboard Administrator - Manual (Page 178)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 178
IPv6 Information
Parameter Description
IPv6 Indicates whether IPv6 is enabled or disabled on the
Active Onboard Administrator.
IPv6 Link Local
Address The link local IPv6 address of the Active Onboard
Administrator. When IPv6 is enabled, one link local IPv6
address is autoconfigured for the Active Onboard
Administrator.
IPv6 Dynamic DNS Indicates whether Dynamic DNS is enabled or disabled.
Dynamic DNS updates the DNS server with new or
changed records for IP addresses. This enables you to use
the same host name over time, although the dynamically
assigned IP address might change for the Active Onboard
Administrator.
DHCPv6 Indicates whether DHCPv6 is enabled or disabled on the
Active Onboard Administrator.
Stateless address
autoconfiguration
(SLAAC)
Indicates whether SLAAC is enabled or disabled on the
Active Onboard Administrator.
Current Default
Gateway Indicates the IPv6 address of the default gateway currently
being used by the Active Onboard Administrator. The
Current Default Gateway can be either the Static Default
Gateway or a gateway configured via Router
Advertisements. If Router Advertisements provide IPv6
gateway configuration, their gateway configuration
overrides the static IPv6 gateway setting.
Static Default
Gateway Indicates the static IPv6 address of the IPv6 default
gateway. This is displayed only if configured.
General Information
Parameter Description
DNS Server 1 IP address of the first DNS server used by the Active
Onboard Administrator.
DNS Server 2 IP address of the second DNS server used by the Active
Onboard Administrator.
DNS Server 3 IP address of the third DNS server used by the Active
Onboard Administrator.
Onboard
Administrator
Name
The name used for the Active Onboard Administrator.
MAC Address The MAC address of the Active Onboard Administrator.
Domain Name The name of the domain for the Active Onboard
Administrator.
NIC Settings The NIC settings for the Active Onboard Administrator,
such as auto negotiation, duplex mode, and speed.
Link Status
Indicates whether the NIC is actively connected to the
network.