Interconnect bay port mapping screen – HP Onboard Administrator User Manual
Page 244
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 244
Button
Description
Reset
Clicking this button forces the interconnect device to shut down and then power back
up again, performing a reset
Toggle On/Off
Clicking this button turns the UID on the interconnect device on (blue) or off (gray) for
easy identification of the selected interconnect device
NOTE:
If an interconnect module is powered off, the module will be powered on after an
Onboard Administrator restart or the module will failover if sufficient enclosure power is
available.
Interconnect Bay Port Mapping screen
The Interconnect Bay Port Mapping screen provides a graphical view and a table view of the interconnect
bay port mapping.
Graphical view
When you mouse over the port on the interconnect, the graphical view provides the same information that
appears in the table view.
Table view