HP Onboard Administrator - Manual (Page 308)

Troubleshooting 308
179 The certificate cannot be removed because it does not exist.
180 The interconnect tray is not present.
181 The blade is not present.
182 Users cannot remove or disable themselves.
183 Invalid time zone
184 Error setting CLP strings
185 Error getting CLP status
186 Error setting ISMIC info block
187 Error reading ISMIC info block
188 Error clearing blade signature
189 Error setting blade signature
190 Request is valid only for server blades
191 Request is valid only for ProLiant server blades
192 The string entered is not a valid netmask.
193 The string entered is not a valid gateway.
194 The string entered for DNS server 1 is not valid.
195 The string entered for DNS server 2 is not valid.
196 Error trying to remove a nonexistent SSO name
197 Error trying to add an SSO name
198 Invalid SNMP trap community
201 Could not open the event pipe for reading.
202 Did not read the proper size for events.
203 Event length mismatch.
204 The event listener was terminated.
211 Error obtaining blade power reduction status
212 Update the other OA firmware to enable this feature.
213 Dates before 14 June 2006 are not valid.
214 The certificate exceeds the maximum valid size.
215 E-Fuse cannot be reset.
216 Firmware update in progress. Login is disabled.
217 An error occurred while setting the enclosure PDU type.
218 An error occurred while setting the enclosure part number.
219 An error occurred while setting the enclosure serial number.
220 Cannot set time when NTP is enabled.
221 Request is valid only for Itanium/BCS/IPF blades.