HP Onboard Administrator - Manual (Page 86)

Navigating Onboard Administrator 86
The following image shows the graphical view of a typical c3000 enclosure.
All functions and features for the graphical view navigation are the same for both the c3000 and the c7000
enclosures, except where noted.
Selecting a device
To select a device, click the graphical representation of the device in the front or rear graphical view. When
you select a device, the surrounding border changes from gray to light blue to indicate it is the currently
selected device. Selecting a device in the graphical view selects the corresponding device in the left
navigation tree view. Every time you select a device from any part of the navigation system, the rest of the
navigation reflects that device selection event and updates accordingly.
Status reporting
The graphical view reports the status of every device in the enclosure. The status of each device is indicated
on the device by a small status icon. No status icon appears for a device that is working properly and has an
OK status. However, any other status codes appear as status icons on the device.
The graphical view does not report the presence or absence of hard drives in the server blade or storage
blade.
Device security
Although the front and rear graphical views are both affected by user permissions, security on the graphical
view is handled differently from the left tree view. If the user does not have permission to access a device, a
blank bay appears regardless of whether a device is present in that bay, and a padlock icon in the bay table
cell appears, indicating that the bay is locked to the current user.
Minimizing the graphical view