HP Onboard Administrator - Manual (Page 191)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 191
your particular distribution. Windows® operating systems do not have native support for remote system
logging. Any application that listens on UDP port 514 or the specified syslog port can receive remote system
log messages from the Onboard Administrator.
When configured, the Onboard Administrator remote system logging feature can be tested using the GUI
Test button or using the CLI TEST SYSLOG command.
To send system log messages to a remote host, select the Enable remote system logging checkbox.
Field Possible value Description
Syslog Server Address • IPv4
address—###.###.###.#
## where ### ranges from
0 to 255
• IPv6
address—####:####:##
##:####:####:####:##
##:#### where ####
ranges from 0 to FFFF.
• DNS name—1 to 64
characters including all
alphanumeric characters
and the dash (-)
An IPv4 address, IPv6 address, or the DNS
name of the remote host*
Port An integer between 1 and
65535
The IP port of the remote host.
* Use an IPv6 address as the remote system log server.
To send a test message to the remote host address and to the local system log, click Test Remote Log. To use
this function, you must enable remote system logging.
To save the settings, click Apply.