HP Onboard Administrator - Manual (Page 207)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 207
Button Description
Press and Hold This button mimics a physical press and hold of the power button on the server blade.
Clicking this button forces the server blade to shut power off without regard for first
shutting down the OS before turning power off. This option is not available when the
server blade is off.
Cold Boot Clicking this button immediately removes power from the system. This option is not
available when the server blade is off.
Reset
Clicking this button performs a system reset. This option is not available when the server
blade is off.
UID Light
To help identify a specific server blade, click Toggle On/Off to turn the server blade's UID light on (blue) or
off (gray).
DVD Drive
Column Description
Connect to Device The menu enables you to connect or disconnect the shared DVD drive by selecting
Connect to Enclosure DVD or Disconnect DVD Hardware.
iLO DVD Status This field indicates whether the server blade has a Virtual Media connection. Possible
values are Connected or Disconnected. A status of Incompatible Firmware means the
DVD feature is not supported with the iLO firmware installed on the device.
Device or Image URL This field displays the current Virtual Media connection of the blade. Possible values
are:
• Virtual Media Applet is connected
• Feature not supported on Integrity iLO version x.xx
• SSH is disabled on this blade's iLO processor
• Upgrade ProLiant iLO version x.xx to 1.30 or higher
• Enclosure DVD
• Tray Open or No Media
• URL to USB key ISO image file
• iLO has no IP address