HP Onboard Administrator - Manual (Page 205)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 205
Row Description
Manufacturer Name of the company that manufactured the server blade
Product Name Common descriptive name for the server blade
Part Number Part number used when ordering an additional or replacement server blade of this type
System Board Spare
Part Number Part number used when ordering an additional or replacement system board of this
type
Serial Number The static factory serial number for the server blade
Serial Number (Logical) A logical serial number assigned to the server blade
UUID
The UUID assigned to the server blade
UUID (Logical) A logical UUID assigned to the server blade
BIOS Asset Tag If configured, this is the asset tag of the installed server blade.
Server Name If configured through the BIOS, this appears as the ProLiant server name. For ProLiant
or Integrity server blades with HP OS agents installed, this is the server host name.*
ROM Version
ROM version number
Boot Mode Booting mode for the server blade. Boot Mode displays only if the server blade
supports the Unified Extensible Firmware Interface (UEFI). Possible values are Legacy,
UEFI, or UEFI Optimized.
* The iLO web console enables you to change the server name. The iLO 2 servers have a limitation in which the iLO only
alerts the Onboard Administrator when any of the first 28 characters of the name are changed. Otherwise, no
notification is sent to Onboard Administrator. As a result, the server name shown in Onboard Administrator might differ
from the iLO server name.
Server NIC information
Row Description
Ethernet FlexNIC
LOM:(x)-(a-d) A Flex-10 enable 10Gb NIC configured in Virtual Connect. The four FlexNICs on port
x of a server LOM that supports Flex-10 are numbered LOM:x-a, LOM:x-b, LOM:x-c,
and LOM:x-d, where x is the port 1–4. See the HP Virtual Connect c-Class BladeSystem
User Guide for detailed information on configuring Flex-10 NICs.
Ethernet FlexNIC (NIC
x) LOM: (y)-(a-d) A Flex-10 enable 10Gb NIC configured in Virtual Connect, where x is a NIC 1–32.
The four FlexNICs on port y of a server LOM that supports Flex-10 are numbered
LOM:y-a, LOM:y-b, LOM:y-c, and LOM:y-d, where y is the port 1–8. See the HP Virtual
Connect c-Class BladeSystem user guide for detailed information on configuring
Flex-10 NICs.
Port: NIC x The MAC address of this NIC port, where x is a NIC port 1-4.
Port: iLO The MAC address of the iLO port for the server blade in this enclosure slot
Port: iSCSI x The MAC address of this iSCSI port, where x is an iSCSI port 1–8.
Ethernet FCoE
FlexFabric Adapter:
(y)-(a-d)
A FCoE FlexFabric adapter consists of 4 NICs.The four FlexNICs on port y of a server
LOM that supports Flex-10 are numbered LOM:y-a, LOM:y-b, LOM:y-c, and LOM:y-d,
where y is the port 1–8 LOM:y-b can be used to configure FCoE traffic.
Ethernet iSCSI
FlexFabric adapter:
(y)-(a-d)
A iSCSI FlexFabric adapter consists of 4 NICs.The four FlexNICs on port y of a server
LOM that supports Flex-10 are numbered LOM:y-a, LOM:y-b, LOM:y-c, and LOM:y-d,
where y is the port 1–8 LOM:y-b can be used to configure iSCSI traffic.
Mezzanine card information
Column Description
Mezzanine Slot The physical slot in which the mezzanine card is located