HP Onboard Administrator - Manual (Page 50)

Enclosure KVM 50
Returning to the KVM Menu from another interface
To return to the KVM Menu from a server console, Insight Display, or the OA CLI display, press the Prt Scrn
key on the USB keyboard.
Returning to the Insight Display from the KVM Menu
To restore the Insight Display and blank the KVM Menu (A slight delay may occur.), press any Insight Display
button, or select Exit KVM on the KVM Menu.
Navigating the KVM Menu
The following figure shows the KVM Menu:
To navigate the HP KVM Menu, use the keyboard arrow keys. To select a menu action, press the keyboard
Enter key.
The available actions include:
• Power icon—Changes the power state for the server.
• DVD icon—Changes the Enclosure DVD state for the server.
• Server Name—Connects to the server full-screen KVM console, including keyboard and mouse support.
To return to the KVM Menu, press the Prt Scrn or SysRq key.
• Insight Display—Uses the KVM monitor and the keyboard arrow and Enter keys to operate the Insight
Display.
• OA CLI Console—Uses the KVM monitor and keyboard to access the OA CLI commands.
• Exit KVM—Disables the KVM monitor and enables the enclosure Insight Display.
• Help—Displays an HP KVM Help screen with information about the status icons and KVM operation.
If the LCD PIN is set, all the server power and server DVD controls are LCD PIN-protected. Server Console and
Onboard Administrator CLI are protected by user logins.
The KVM Menu contains the following options:
• Server Console—Select a server console by selecting the server name. The selected server console is full
screen graphics or text based on the current environment on that server. All KVM keyboard keystrokes