HP Officejet 4314 All-in-One Printer - Manual (Page 74)

9 Maintain the HP All-in-One
The HP All-in-One requires little maintenance. Sometimes you might want to clean the
glass strip inside the automatic document feeder to ensure that your copies and scans
remain clear. You will also need to replace, align, or clean your print cartridges from
time to time. This section provides instructions for keeping the HP All-in-One in top
working condition. Perform these simple maintenance procedures as necessary.
●
Clean the HP All-in-One
● Print a self-test report
● Work with print cartridges
Clean the HP All-in-One
To ensure that your copies and scans remain clear, you might need to clean the glass
strip or white strip inside the automatic document feeder. You might also want to dust
the exterior of the HP All-in-One.
●
Clean the glass strip
● Clean the white strip
● Clean the exterior
Clean the glass strip
Minor debris can accumulate on the glass strip located inside the automatic document
feeder. This can cause print quality issues such as streaks or lines to appear on your
printouts.
To clean the glass strip inside the automatic document feeder
1.
Turn off the HP All-in-One, and unplug the power cord.
Note Depending how long the HP All-in-One is unplugged, the date and
time might be erased. You might need to reset the date and time later,
when you plug the power cord back in.
2. Lift the cover of the automatic document feeder.
There is a glass strip under the automatic document feeder.
User Guide 71
Maintain the
HP All-in-One