HP Officejet 4314 All-in-One Printer - Manual (Page 76)

3. Clean the white strip with a soft cloth or sponge slightly moistened with a mild
soap and warm water.
Wash the strip gently to loosen debris. Do not scrub the strip.
4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing)
alcohol, and wipe the strip thoroughly with a damp cloth to remove any residual
alcohol.
Caution Be careful not to spill alcohol on the glass or exterior of the
HP All-in-One, as this might damage the device.
5. Close the automatic document feeder cover.
6. Plug in the power cord, and then turn on the HP All-in-One.
Caution Make sure you close the automatic document feeder cover before
loading any paper or originals. If you do not close the cover, you might
damage the mechanism.
Clean the exterior
Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off
the case. The interior of the HP All-in-One does not require cleaning. Keep fluids
away from the control panel and the interior of the HP All-in-One.
Caution To avoid damage to the exterior of the HP All-in-One, do not use
alcohol or alcohol-based cleaning products.
User Guide 73
Maintain the
HP All-in-One