EOTech Target Pointer Illuminator Aiming Light - Manual (Page 38)

2-14
c. Mount the AN/PEQ-2A to the Rail Grabber Bracket
as shown in Figure 2-8. Turn the thumbscrew
clockwise to tighten. Use a screwdriver or similar
tool in the slot of the thumbscrew to fully secure the
AN/PEQ-2A to the Rail Grabber Bracket.
d. Install the Remote Cable Switch in a convenient
location (see paragraph 2.5.3).
Figure 2-8 M249 SAW Feed Tray Cover Rail Using
Insight Rail Grabber Bracket