EOTech Target Pointer Illuminator Aiming Light - Manual (Page 74)

2-50
WARNING ..
The Class 3B lasers (high power) described in
Table 2-8 shall NOT be used in force-on-force
training.
2.5.1 Mode Selection. Modes of operation for the AN/PEQ-
2A are accessed by turning the Mode Selector to the desired
position. When in the OFF (0) position, the device will not
operate and will not emit laser radiation.
Figure 2-29 Mode Selector
WARNING ..
To prevent inadvertent activation of the lasers, the
AN/PEQ-2A should be in the OFF (0) position
when not in use.
Mode Selector