Chatsworth Products Remote Infrastructure Management System Protocol Converter User Manual
Page 23
RIM-Protocol Converter User Guide - Version 1.0
Chatsworth Products, Inc. (CPI) • 800-834-4969
23
3.2
Log In to the Protocol Converter
Once the IP address for the Protocol Converter has been set as described in 3.1., “Configure Communications” on page 19, you
can log in to the Protocol Converter:
Open a Web browser and type the Protocol Converter’s IP address (default is 10.0.0.188) into the location bar.
When prompted, enter the Protocol Converter user name (default is cpi).
Figure 3.4 Protocol Converter Login Screen
NOTE: There is no default password; if you have not set a password, leave this field blank.
Once you enter the correct user name (and password), the Devices page displays.
The Devices page of the Protocol Converter is shown below. The table on this page displays a list of slave devices
and their status.
Figure 3.5 Protocol Converter Devices (Home) Page