Chatsworth Products Remote Infrastructure Management System Protocol Converter - Manual (Page 37)

RIM-Protocol Converter User Guide - Version 1.0
Chatsworth Products, Inc. (CPI) • 800-834-4969 37
3.6.4 SNMP Register Configuration
If you are configuring an SNMP device, the register configuration page looks like this:
Figure 3.17 SNMP Register Configuration
1. Type an appropriate value in each field, or choose the value from the drop-down.
Table 3.6 SNMP Register Configuration Options
Option Description
SNMP Get OID The OID (object identifier) the Protocol Converter uses to gather the correct
integer data from the SNMP device being polled.
OID Type The object identifier type. Currently the Protocol Converter can poll integer data.
Gain The gain value of the raw data being received (set only if necessary).
Offset The offset value of the calculated reading to the register.
Label
Designate a name (label) for the register being configured.
Labels can contain up to 30 alphanumeric characters.
HTML Display
This option allows you to choose how the value is
displayed on the register page. Choose from Integer (whole
number) or Float (number plus decimal).