Chatsworth Products Remote Infrastructure Management System Protocol Converter - Manual (Page 62)

RIM-Protocol Converter User Guide - Version 1.0
62 www.chatsworth.com
A.6. Load a Device Configuration (.xml) File
An .xml file that you have saved using the Protocol Converter’s user interface can be loaded to another device. This procedure
may not work in all cases; some manufacturers use the same register set across different models of the same type of device,
and others do not.
To load an .xml file to a device:
1. Click the Device Configuration link in the top bar.
Figure A.11 Device Configuration Link
2. The Device Configuration web page displays. Locate the configuration box for the device
to which you want to upload a saved .xml file.
Figure A.12 Device Configuration Web Page
3. Click the Upload XML link in that device’s configuration box.
The XML Upload dialog displays in a secondary browser window.
Figure A.13 XML Upload Dialog
4. Browse for the .xml file you saved. Select the file, then in the Index Base box, indicate the index (register) number you want to
start from when the upload occurs.