Chatsworth Products Remote Infrastructure Management System Protocol Converter - Manual (Page 32)

RIM-Protocol Converter User Guide - Version 1.0
32 www.chatsworth.com
3.6.2 Register Configuration Web Pages
Access the Register Configuration page by clicking on the Registers link in the menu bar.
1. Click on the register number to configure individual registers.
Figure 3.12 Register Configuration Page
The configuration page for that register displays. Notice that the Unit number corresponds to the Device number listed on the
Register Link page.
2. Enter the necessary information for the register type you are configuring. See Sections 3.6.3 to 3.6.5 for more information.
3. Click Submit.
The Protocol Converter updates the information and displays the information that applies to that unit (Modbus, SNMP, or BACnet).