Chatsworth Products Remote Infrastructure Management System Protocol Converter - Manual (Page 64)

RIM-Protocol Converter User Guide - Version 1.0
64 www.chatsworth.com
9. Revert to the preset registers or delete all register information as follows:
• To revert to the preset values, indicate a Start Index number. This is the number of the register at which you
want to begin the preset operation.
If you choose to preset the register values, the following message displays when the
operation is complete:
8036 registers preset at index 1
• If you choose Delete Device/Registers, all device information will be deleted. Use this option with caution.
You do not need to enter a Start Index number when deleting all registers.
If you choose the delete option, the following message displays when the operation is complete:
Device and Registers deleted