Chatsworth Products Remote Infrastructure Management System Protocol Converter - Manual (Page 60)

RIM-Protocol Converter User Guide - Version 1.0
60 www.chatsworth.com
A.4. Load a Configuration (.cfg) File
Once you have saved a configuration file as described in A.3., “Save a Configuration (.cfg) File” on page 59, you can load that
file to the same Protocol Converter or other Protocol Converters.
To load a configuration file (.cfg) to the Protocol Converter:
1. Ensure that the .cfg file you want to load is on a local drive.
2. On the Protocol Converter interface, go to Configuration>System.
Figure A.8 System Page
3. Click the Browse button.
4. Locate and choose the configuration file (.cfg) that you saved. The path and name of the configuration file (.cfg) displays in the
field to the left of the Browse button.
5. Click the Upload button.
The configuration file is loaded while the Protocol Converter displays a message confirming that it is loading the new file. When
the file is loaded, the Protocol Converter reboots itself. The reboot process takes approximately 60 seconds. After the reboot, the
Home page displays.