Chatsworth Products Remote Infrastructure Management System Protocol Converter User Manual
Page 26
RIM-Protocol Converter User Guide - Version 1.0
26
www.chatsworth.com
Table 3.1 Network and Web Configuration Fields (continued)
Option
Description
Web
Password
Read/Write
The Protocol Converter can be configured with two passwords - the read/
write password allows users to access the web interface and to edit all settings.
Specify an alphanumeric value up to 16 characters.
Web Refresh
Rate
This integer value represents how long the system waits until it updates
the Web interface with current data. To change the rate, click in the field
and type the desired amount of time (in seconds). The default refresh rate
is set to 0, which means the Protocol Converter will not refresh at all. If you
want the system to automatically refresh, set the refresh rate to a positive
number greater than 0. The minimum recommended refresh rate is five
seconds. A slower rate could cause errors that prevent the system
from functioning properly.