Samsung SCX-8240NA-CAS - Manual (Page 115)

Faxing (optional)_ 115
Redialing the last number
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 119).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 120).
6. Press Recent.
7. Press the fax number you want to redial. Then press OK.
• Add to Address: Allows you to add a fax number in the
Recent results to Address Book.
• Delete: Allows you to delete a fax number in the Recent
results. Press the fax number you want to delete. Then press
Delete.
8. Press Start on the control panel. The machine starts to scan and send a
fax to destinations.
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not be
present.
• When you use this option, Priority Send in the Advanced tab are
inactivated.
• When you use this option, you cannot send a fax using the On
Hook button on the display screen.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 119).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 120).
6. When the cursor is blinking in the input line, enter the fax number using
the numeric keypad on the control panel. Or use Address Book from
the display screen, if you have stored frequently used fax numbers.
7. Press the Advanced tab > Delay Send > On.
8. Press the Job Name input area. Then the pop-up keyboard appears.
Enter the job name you want. Press OK.
If you do not enter a job name, the machine assigns the job name as
'Fax Job Send'.
9. Set the delay sending time.
You can set the delay sending time to be 15 minutes later than the
current time. For example, if it is 1:00, then you can set the time
starting to be 1:15. If the set time is incorrect, a warning message
will appear when the machine resets it to the current time.
10. Press OK to save the setting.
11. Press Start on the control panel. The machine starts to store the
scanned original data into memory.
To cancel delaying a fax, press Off before sending is activated.