Samsung SCX-8240NA-CAS - Manual (Page 91)

Scanning_ 91
Resending the latest server address
To resend the server address you sent latest:
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Scan to Server from the display screen.
3. Set the scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 96).
4. Press the Basic tab.
5. Press Recent.
6. Press the server address you want to resend. Then press OK.
• Add to Address: Allows you to add a server address in the
Recent results to the Address Book.
• Delete: Allows you to delete a server address in the Recent
results. Press the server address you want to delete. Then
press Delete.
7. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 96 and "Changing the resolution" on
page 96).
8. Press the Start button to scan and send the file.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
An example of security configuration for anonymous
user on SMB server.
To send data to an SMB server, the security configuration on the SMB
server should be set to use the Anonymous option.
The following procedure is based on the Windows XP Professional SP3
operating system.
Depending on operating sytems, the procedure may be different, or
not permit access for unauthorized persons.
1. Click on Windows Start > Control Panel > Administrative Tools >
Local Security Policy.
2. Click on Local Policies > Security Options.
3. Change the below settings to Enabled.
• Network access: Allow anonymous SID/Name translation
• Network access: Let Everyone permissions apply to
anonymous users
4. Add the shared folder name on Network access: Shares that can be
accessed anonymously, as shown below.
The following image is an example of entering “Shared”.
5. Click Apply and then OK.
6. Select the shared folder and click on the right mouse button.