Samsung SCX-8240NA-CAS - Manual (Page 74)

Copying_ 74
Setting job completion notification
When a copy job is completed, this machine can send the completion
notification using an email. This feature is helpful for a large copy job. You
do not need to wait beside the machine until the copy job is completed .
To recieve the job completion notification, you need to set up network
parameters and email settings using the control panel or SyncThru™
Web Service. For details about how to set up the network parameters
and email settings, refer to the Administrator’s Guide on the supplied
CD.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
3. Adjust the settings for each copy such as Paper Supply,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 54).
4. Set the copy features in the Advanced or Image tabs, if necessary (see
"Using special copy features" on page 61).
5. Enter the number of copies using the numeric keypad on the control
panel, if necessary.
6. Press the Advanced tab > Job Completion Notification.
7. Press On to activate this feature.
8. Press Email Address input area. The pop-up keyboard appears.
Enter the email address which you want to recieve the job completion
notification. Press OK. You can also
• You can select the email address pressing Address Book.
• You can enter an email address only.
9. Press OK from the display screen.
10. Press Start on the control panel to begin copying.
Build job
This feature allows you to copy various originals at once consisting of
multiple batches and/or different sizes. The copy job will start after scanning
all originals.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
3. Adjust the settings for each copy such as Paper Supply,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 54).
4. Set the copy features in the Advanced or Image tabs, if necessary (see
"Using special copy features" on page 61).
5. Press the Advanced tab > Build Job from the display screen.
6. Press On. The machine starts to scanning.
After the scanning, the machine shows the window asking to place
another page. Load another original and press Yes. You can change the
copy setting pressing Change Settings, if necessary. When you finish,
select No on this window.
7. The machine starts to print out.
Selecting the type of originals
The original type setting is used to improve copy quality by selecting
document types for current copy jobs.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).